Description

Art No: BV100H-D – Hood Mounted Desktop Spray Booth Extraction Unit with Flexi-Duct

Air Extraction and Filtration Cabinets

This hooded airbrush spray booth captures, filters and expels for a cleaner, healthier working environment within art, graphics, design technology areas, crafts and modelling and more….

Hooded Airbrush Spray Booth applications:
Aerosol adhesives (glue booth for Spray Mount), aerosol lacquers and fixatives and airbrush sprays applied to artwork up to A1 size. A1 or A2 drawing boards can be placed into the hoods at an angle for efficient overspray capture. This hooded airbrush spray booth also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.

All BenchVent filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.

BV100H-D – Extraction cabinets (All odours and gases are extracted to atmosphere)

Download the datasheet for more information: BV100H-D Datasheet

Description:
Steel construction finished in dove grey – fan/filter unit mounted onto hood enclosure – particulate filter – 2 x centrifugal blower external rotor motor type, brushless, UL, VDE and CSA approved – sealed electrical wiring and switch, downstream of filter. Flexi-ducts:  2×2 metres x 100mm dia.

Operation:
All BenchVent filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.

For artwork applications, standard A1 drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient overspray capture. 3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning, sanding, gluing etc. The Flexi-ducts can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience.

Filtration:
The particulate (intake) filter is a three stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns. The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces or eliminates operator exposures to potentially hazardous substances.
Specification

These cabinets are designed for studio / classroom / workshop cleanliness and for immediate operator protection whereby ‘large’ particulates (> 5 microns) are filtered out and ‘fine’ particulates (<5 microns) together with odours, gases, vapours and fumes within the hood enclosure are exhausted to atmosphere via the flexi-duct(s).

Please contact us for advice on the choice of machine for any given situation. For filters, please click here.

NOTE: This unit exhausts air via flexi-duct to atmosphere.

Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH) regulations 2002 and 2004.

Additional information

Weight	40 kg
Dimensions	950x680x615 (wxhxd) [internal] 955x750x740 (wxhxd) [overall] – Weight : 35 kg
Description	Steel construction finished in grey – fan/filter unit mounted onto hood enclosure – particulate filter – 2 x centrifugal blowers – external rotor motor type, brushless, UL, VDE and CSA approved -sealed electrical wiring and switch, downstream of filter. 2 Flexi-ducts each 2 metres x 100mm dia.
Air Volume at Free Air	710 m3/hr
Ave. Air Velocity at Filter Face	0.6 m/s
Ave. Air Velocity at Hood Face	0.27 m/s
Fan Motor Spec	230V 50Hz 210W, 115V 60Hz 220W
Filters	Particulate Filter: IFA2
Noise Level LAeq dB(A)	60 Db(a)