BenchVent BV200S Airbrush Spray Booth

Description

Part No: BV200S – BenchVent BV200S Desk Top Spray Booth

Desk Top Spray Booths for Glues, Aerosols, Airbrushes and more. Contains and filters fumes and dusts for a cleaner, healthier working environment within art, graphics, hobbies, modelling and crafts.

Desk Top Spray Booth Applications include filtration of:

Aerosol adhesives (glue booth for Spray Mount), aerosol lacquers and fixatives and airbrush sprays applied to artwork up to A2 size. Craft, hobby, model aerosol and airbrush paints, solders, light grinding particles and and dusts, cleaning solvents, etc.

 Desk Top Spray Booth Description:

Steel construction finished in dove grey –– plastic replaceable spray/fume shield – back stand or carry handle – particulate filter – carbon impregnated fibre filter – axial fan, external rotor motor type brushless, UL, VDE and CSA approved (BV200S has two fans) – sealed electrical wiring and switch, downstream of filters. 

Operation:

All Graphic Air filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.

These units can be used in two positions:

• Reclining position (on back-stand) – For Spray Mount, aerosol lacquers and fixatives etc. applied to artwork placed onto the filter. BV200S accommodates artwork up to A2
• Upright position – For model sprays and airbrush use – light grinding particles – solder fume displacement – general solvent dilution etc.

Filtration:

The particulate (intake) filter is a three stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns.
The carbon impregnated fibre filter (behind intake) assists in the reduction of solvent odours.

Through the process of filtration, adsorption and dilution, operator exposure to potentially hazardous substances is vastly reduced.

Specification:

Model No.	Fan Motor  * Spec.	Air Volume at Free Air	Ave. Air Velocity at Filter Face	Ave. Air Velocity at Hood Face	Noise Level LAeq dB(A)
BV200S	230V 50Hz 80W	650 m3/hr	0.50m/sec	0.35 m/sec	61 dB(A)

* 110V 60Hz available if required.

19kg

Printable PDF Specs

These units are designed predominantly for studio / classroom / workshop cleanliness and for immediate operator protection from concentrations of airborne contaminants. They are not recommended for continual usage, i.e. production applications, particularly in confined and/or badly ventilated areas.(See extraction cabinets BV300S-D, BV200H-D & BV100H-D for complete vapour extraction for higher specification filtration.)

Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH) regulations 2002 and 2004.

Additional information

Weight	15.5 kg
Dimensions	86 × 56 × 16 cm
Voltage	210V, 100V