AutoBorne Sealer Black – 480ml

Buyers outside of the UK are responsible for any VAT, tariff, duty, taxes, handling fees, customs clearance charges, and other fees required by their country for importing consumer goods.

£44.44 inc vat

If you want a different size, please choose below:

SKU: CTX-6002-16

Description

Art No: CTX-6002-16 – AutoBorne Sealer Black – 480ml

AutoBorne Sealers are a professional, waterborne DTS (Direct To Substrate) primer for application direct to aluminium, wood and most plastics. It is not a direct-to-metal (DTM) primer. When working on bare metal, first apply a self etching DTM primer.

AutoBorne Sealers are waterborne sealers designed for use with waterborne and solvent borne base coat paints. The sealers should be colour-keyed with the base coat or mid‐coat colour to be applied for improved coverage. AutoBorne Sealers are easy to apply, dry quick, self‐level and may be dry‐sanded. As part of a complete custom system topcoat with Auto-Air Colors or Wicked Colors for a seamless colour system as well as any other type of waterborne or solvent‐based paint.

AutoBorne Sealers features:

  • Compatible for use with any paint type including urethane, water-based and waterborne.
  • Universally compatible with all automotive primers.
  • VOC compliant in the United States, Canada and Europe.
  • Available in a full line of colours for colour–keyed mid-coat application
  • May be used as base coat and top-coated direct
  • Excellent durability and tenacious adhesion for long lasting paint jobs
  • Resists cracking and prevents bleed through FROM underlying fillers
  • Excellent self-levelling
  • Quick to Dry
  • Easy to Sand
  • Does not require sanding prior to application of mid-coat paint and top-coat clear

Available in 8 oz, 32 oz (and 1 gallon sizes by special ORDER – please contact us)

Preparation of Substrates:

  • Harder plastics such as polystyrene may require application of an adhesion promoter prior to application of sealer.
  • Metal (except aluminium) requires a self-etching DTM primer before application of AutoBorne sealer.
  • Wash all surfaces to be painted with wax and grease remover.
  • If sanding is required, prepare surface with 600 – 800 grade sandpaper.
  • If surface is sanded, wash off all residues with wax and grease remover.

Conditions:

  • 21 Deg C with humidity levels under 65%
  • Best results are achieved with increased air temperatures in a non-humid environment
  • Use fans to assist air drying
  • Painting in or drying paint in lower temperatures or higher humidity levels will require extended flash and drying times.

Equipment set-up:

  • Spray gun fluid tip 1.3 – 1.4mm
  • Touch-up gun fluid tip size 0.8 – 1.2mm
  • Approx. 19 – 28 psi inlet, adjust gun for wetted coats which are not over-atomized

Not recommended for use with an airbrush

Application:

  • Reduce 9:1 with 4011 High Performance Reducer (approx. 10% per volume)
  • Allow reduced mixture to set 10 minutes or more prior to spraying
  • Reduction allows for a smoother finish and improved coating integrity.
  • 2 – 3 coats for complete coverage
  • Re-coat (between coats) approx. 10 minute flash time or until dried to a matte finish mid-coat (or base coat), approx. 60 minutes.
  • Use air flow or heat (175 Deg F or less) to assist flashing between coats
  • Re-coat paint after approximately 30 minutes drying time
  • Dry to sand after approximately 60 minutes for best shaving. Dry sand only.
  • Use of heat reduces dry times. Do not exceed 175 Deg F
  • Dry sand with 800 – 1000 grit paper
  • Sanding is not required prior to application of paint or top-coat clear
  • Dry Sand Only. Do not wet sand.

Additional information

Weight 0.5 kg

Reviews

There are no reviews yet.


Be the first to review “AutoBorne Sealer Black – 480ml”